• Operation voltage (24VDC)
• Communication with ethernet connection
• You need to make sure that your PC and your intercom is connected to the same network as INSPINIA .After the Inspina Touch panel is opened, 8080 is added to the end of the product IP address(Default IP =192.168.2.100) to access the product Web interface via the web browser.(Figure 1.1)

• You can access the user interface as shown in the aboce picture.

User interface (Figure 1.2)   Username = admin / Pasword= admin (New version’s password: 4W3FVG)

• Click the intercom tab in the settings section for configuration.(Figure 1.3)

• Drag and Drop the image on the right. (Figure 1.4)

• You can make settings after double click the image (Figure 1.5)

1. Name = Text the Device’s name (A Blok )
2. Intercom = Choose the Intercom type (2N)
3. Intercom Ip Address = Text the Intercom Ip Address (2N)
4. Relay type = Choose the Relay Type

a) GPİO = Touch panel output control

      Output = Choose the Relay output which you want to control with

b) BUS = Relay control with Bus Line

      Bus Address= Ip address of the relay module

c) Ip modul =Control with smart Ip relay

      Ip Address=  Ip address of the smart relay

d) 2N= Control of the Internal relay in 2N

     Username =  Text a  name which you prefer

     Password=   Text a  password which you prefer

• You can go to web interface of the 2N by write the ip addres into web browser. (Figure 2.1)

• Web Interface (Figure 2.2)    Username = admin    Pasword= 2n

• Click to directory section for make connection between Intercom and Inspinia (Figure 2.3)   

• Click to “creat new user” section and text your information. (Figure 2.4)  

1. Name = Text a name  (A Block )
2. Virtual Number = Number of the apartment to calling by intercom
3. Phone Number = Touch pane IP ( sip:x@IP:7000 )

• You will see HTTP API, Services and Account sections for control relay. (Figure 2.5)

1. Username = Touch Panel   Username (Figure 5)
2. Password = Touch Panel    Password (Figure 5)